Genicom MatrixPrinter LA36 - Manual (Page 42)

4-6
4.9 4.9 4.9 4.9 4.9 Level 2 Maintenance Level 2 Maintenance Level 2 Maintenance Level 2 Maintenance Level 2 Maintenance
Level 2 maintenance includes lubrication, adjustment, and parts replacement. Level 1 maintenance should be
done at the same time as level 2 maintenance.
4.9.1 Parts replacement
Remember the following notes when replacing any component.
• Keep assembly areas clean.
• Turn off power to equipment and unplug it before disassembly or assembly.
• Follow procedures carefully. Do not disassemble parts that are not to be disassembled.
• Store disassembled parts in a clean place where they will not get lost.
• Check parts for number and shape after replacement, and adjust them if necessary.
• Reassemble the printer following the steps in reverse order of disassembly.
• Confirm that all connectors are connected correctly.