Genicom MatrixPrinter LA36 - Manual (Page 19)

2-2
2.3 2.3 2.3 2.3 2.3 Unpacking Unpacking Unpacking Unpacking Unpacking
Unpack the printer as follows (Figure 2.1):
1. Open the carton and remove accessories — the Installation guide, CD-ROM, cut-sheet stand, platen knob,
power cord (100 –120 or 220 –240 VAC), serial interface cable, and ribbon cartridge.
2. Lift out the printer together with its packing cushions (not shown in the figure). Remove cushions and place
the printer carefully on a level, vibration-free surface.
Figure 2.1 Unpacking the printer and accessories
Ribbon
cartridge
CD-ROM
(User guide &
Printer driver)
Serial interface
cable
Cut-sheet stand
Installation
guide
Power cord
Platen
knob
Printer
(LA36N)
Shipping
carton