GE v6 - Manual (Page 131)

Secure Perfect 6.1.1 User Manual 129
Create Default Template
File Menu
Select this option to create a default Report template. This option is available only when a Report Form is
displaying.
If a specific date is part of this template, whenever this report is run, it will use that date; therefore, it is
important to update the calendar criteria as needed.
Creating a Dial-Up Micro Record
Reference Topic:
Records Generation
Set up your modem(s) through the Server or client computer’s operating system. Refer to the
documentation you received with your modem.
1. Select the Administration menu, then select Parameters.
2. Select the Communication Settings tab, and enable the modem(s) that will be used for micros. You
will need to stop the SP Server computer and then restart it.
3. Once you restart Secure Perfect and log in, select the Device menu, then Micro.
4. On the Micro Definition tab, default values will be filled in for the following fields: Head of line and
Badge Loading.
Enter the address of the micro.
Enter the type of micro.
If this micro is the first micro on a string of micros, select Yes under Head of line. Otherwise,
select No and select the head of line micro. If this is a downstream micro that you are adding,
the micro directly upstream (towards the host) from it will need to be reset in order for it to
recognize the micro you are adding.
Example:
If your line of micros looks like this:
Host – Micro 1 – Micro 2
And you want to add Micro 3 to the end of the line so that it now looked like this:
Host – Micro 1 – Micro 2 – Micro 3
Then you would need to reset Micro 2 in order for Micro 3 to be recognized.
For Connection type, select Dial-up.
Select a Badge Loading method.
5. On the Password tab, if you do not enter passwords, the default passwords (one-1, two-2, three-3,
and four-4) are used. If you want to change the passwords, you may do so at any time.
6. On the Time Zone tab, verify and adjust time zone settings as necessary.
7. On the Comments tab, you may enter any information you want or leave this tab blank.
8. On the Events tab, you may want to schedule when APB and T&A are reset and when the host
dials the micro. If you select an event for the Dial field (host dials the micro), you must stop and
restart the SP Server before the host will recognize the event settings.
9. Select the Status tab to view information about the micro such as the firmware version. You can
request the latest information by clicking Refresh.
10. On the Settings to Reach Host tab:
Enter the telephone number(s) that the micro will dial to reach the host.
Enter the interval at which the micro will automatically dial the host.
Enter the number of times the micro will try the same number.
Enter the number of intervals that the micro will wait before trying a telephone number again.
11. On the Settings to Reach Micro tab:
Enter the telephone number(s) that the host will dial to reach the micro.
Enter the interval at which the host will automatically dial the micro.
Enter the number of times the host will try the same number.
Enter the number of intervals that the host will wait before trying a telephone number again.