GE v6 - Manual (Page 174)

Secure Perfect 6.1.1 User Manual 172
Floor/Digital Output/Digital Input Tab
Elevator Form
This tab displays ONLY if you select Floor Tracking By Input from the Floor Tracking field on the
Elevator tab.
Select this tab to link a digital output and a digital input to a floor.
Elevator control does not span micros. This means the reader, digital outputs, and digital inputs (if
applicable) MUST be on the same micro.
Assigned Floor/Digital Output/Digital Input
This windowpane lists the currently assigned floors, digital outputs, and digital inputs.
• Edit: To edit a floor/digital output/digital input link, select an entry from list and click this
button. The
Floor/Digital Output/Digital Input Selection dialog displays.
• Add: To add a floor/digital output/digital input link, click this button. The Floor/Digital
Output/Digital Input Selection dialog displays.
• Remove: To remove a floor/digital output/digital input, select an entry from the list and click
this button.
Floor/Digital Output Selection Dialog
Use this dialog box to create or edit a floor-to-digital-output link.
• Floor: Select a floor from the drop-down list of available floors.
• Digital Output: Select a digital output from the drop-down list of available DOs.
Click OK to accept your selections and close this form.
Floor/Digital Output Tab
Elevator Form
This tab displays ONLY if you select No Floor Tracking or Floor Tracking By Keypad from the Floor
Tracking field on the Elevator tab.
Select this tab to link a digital output to a floor.
Elevator control does not span micros. This means the reader, digital outputs, and digital inputs (if
applicable) must be on the same micro.
Assigned Floor/Digital Output
This box lists the currently assigned floors and digital outputs.
• Edit: To edit a floor/digital output link, select and then click this button. The Floor/Digital
Output Selection dialog displays.
• Add: To add a floor/digital output link, click this button. The Floor/Digital Output Selection
dialog displays.
• Remove: To remove a floor/digital output, select and then click this button.