GE v6 - Manual (Page 135)

Secure Perfect 6.1.1 User Manual 133
BUMPING:
Client Groups This windowpane displays the names of Client Groups
assigned to this Bumping record. Typically, the Client Groups
displayed here are different than those assigned to Routing.
Assign Client Groups Click to display an Alarm Bumping Client Group Assignment
dialog box that allows you to assign Secure Perfect Client
Groups to the Bumping record.
Time To Bump:
• Minutes • Select the number of minutes to wait before bumping this
alarm notification to an additional location, if the alarm is not
acknowledged or purged at the Routing work station. The
Alarm Monitor form will indicate that this alarm is bumped.
The minimum setting is one minute. The default and
maximum is 30 minutes.
• Seconds • Select the number of seconds to wait before bumping this
alarm notification to an additional location. The default is
zero.
• Comments • Use this field to describe the reason for creating this record
or special considerations for this configuration. This field
accepts 256 characters. It is not necessary to complete an
entry in this field.
Definition Tab - API Connections Form
Enter information that defines an interface license for external application integration to Secure Perfect.
Application Login: Enter the login used by the external application to connect and access the API. Each
login must be unique.
Password: We recommend a noncryptic password. The password must be greater than four
alphanumeric or wildcard characters, with no spaces. The password is NOT case sensitive.
Confirm Password: Enter the password a second time.
PC Name: From the drop-down list, select the Secure Perfect computer that will host the external
application.
Definition Tab - Camera Form
This tab displays the camera channel address, with which DVR this camera is associated, and camera
type configurable for Fixed or PTZ. The camera can be enabled or disabled for viewing and managing
from within SP. Use this form to edit the parameters of the selected camera record.
Address
This is a read-only field. The address of the camera is automatically assigned. The address is a 2-digit
number that corresponds to the camera channel on the back of the DVR.
DVMR
This is a read-only field. This field displays the corresponding DVR with which this camera is associated.
Camera Type
Select a type of camera behavior as Fixed or PTZ from the drop-down list.
Enable Camera
By default, this checkbox is selected. The camera can be enabled or disabled for viewing and managing
from within Secure Perfect and setting accessibility from the Digital Video Viewer. Disabled cameras will
not display on the Digital Video Viewer.