GE v6 - Manual (Page 208)

Secure Perfect 6.1.1 User Manual 206
Mode Tab
Reference Topics:
Parameter Form
Mode Schedule Form
Overview – Micro Utility Form
Manual Control Form
Select all or individual micros or clients for immediate change of mode.
Example: The change of mode for micros is helpful for an immediate "lockdown" or to open all doors
immediately. The change of mode for clients applies to alarm routing and bumping.
When you select this tab, a windowpane displays a list of available online micros or client groups in your
system, based on
facility permissions for the current operator.
Element Description
Select Display Type
• Micros: Select to display real time discription, current mode, and address of
online micros.
• Clients: Select to display real time current mode for configured Clients.
Set Mode to From the drop-down list, select one of the available modes to which you want to
change.
• The Current Mode status, as displayed in the list, refreshes automatically
following a change of mode (by schedule or manual control).
• Updates for micros display in the Mode column of the Micro Utility Form.
• Updates for clients display on the Client Monitor Form.
Apply Mode Click Apply Mode to send the command to the micro or client. Available modes
include
Normal
,
Mode 1
,
Mode 2
, and
Mode 3
. (Modes are created and
labeled on the Mode Labels tab of the Parameter Form.)
Purpose Enter the reason for this change of mode. This box accepts 255 characters. This
comment is written to the operator history file and displays on the Operator
History Report.