GE v6 - Manual (Page 227)

Secure Perfect 6.1.1 User Manual 225
Reader Board Records Generation
The reader boards listed in the Boards column on the Micro Configuration tab depend on the Micro Type
you selected on the Micro Definition tab of the Micro Form. When you add a reader board (2RP, 2SRP),
certain records are automatically created:
Reader records:
• If adding a 2RP or 2SRP board, two reader records are generated. By default, these readers
are active and able to accept badge transactions. Readers marked as Active count against
your reader limit.
Alarm records:
• An alarm record is generated for each reader record. If you selected Supervised when you
added the board, an additional alarm record is generated for each reader called Supervised
Reader. If you are adding a 2SRP board, you will receive an additional alarm record for each
reader called Supervised Exit.
• None of these alarms are monitored. If you want them to display on the Alarm Monitor when
the alarm is triggered, you will need to go to the Alarm Form, Alarm Tab and enable Monitor
in the Settings section.
• In addition, all alarms are automatically assigned to Alarm Group 0. To change this, go to the
Alarm Group Form.
Digital input records:
• A digital input record is generated for each reader record.
Digital output records:
• If you added a 2RP or 2SRP board, a digital output record called Aux DO is generated for
each reader record. (There are 2 DO relays available on a 2RP board.)
Reader Button
This option displays a reader assignment dialog box allowing you to configure readers to be used with the
Swipe and Show program. If Imaging is not licensed for the system, this option is not available.
• Select, and then click the right arrow to assign an available reader.
• Select, and then click the left arrow to unassign a reader.
Clicking this icon from the Activity Monitor Form toolbar will access this option: