Micros, Elevator form, Overview – GE v6 User Manual
Page 50
Secure Perfect 6.1.1 User Manual
48
Elevator Form
Reference Topics:
Floor/Digital Output/Digital Input Tab
Use this form to create or modify an elevator record.
For a shortcut menu to related forms, move the mouse pointer below the tab and click the right
mouse button.
Elevator control does not span micros. This means the reader, digital outputs, and digital inputs (if
applicable) must be on the same micro.
Description
To locate and view existing records, click Search. A list of records will display. You can search and view
or edit an existing record.
Micros
Overview
Reference Topics:
Micros
Micro records can be created within Secure Perfect without having the micros attached and
configured. Additional device records can be configured after creating micro records.
Micros control access through the use of devices such as badge readers, alarm points, and output points
physically wired to the micro, which is then connected to the host by one of the following methods:
1. Directly
2. Using RS-232 cabling through a modem
3. Through a network
Secure Perfect provides a micro auto-configuration feature, allowing you to set up the database with the
exact board configuration that you selected during the micro configuration process. When you create a
micro record, only those records for the associated devices (readers, alarms, alarm groups, and digital
outputs) supported by the micro’s configuration are created. The auto-configuration feature anticipates
your configuration requirements. For example, the Micro/PX2000 is a single-board microcontroller. Other
boards do not display for selection, as shown in the image below. This board address is
2
.