GE v6 - Manual (Page 163)

Secure Perfect 6.1.1 User Manual 161
Elevator Tab
Elevator Form
Select this tab to create or edit elevator information.
Reader
To tag a reader as an elevator reader, select a reader from the drop-down list of available readers. If no
readers are listed, check that the readers have been marked active on the Reader tab of the Reader
Form.
Floor Tracking
Select one of three options:
• No Floor Tracking: Floor(s) selected are not sent to Badge History (not tracked).
• Floor Tracking by Input: The floor(s) selected are sent to Badge History.
• Floor Tracking by Keypad: Floor selection is made by using the keypad of the reader and
the floor(s) selected are sent to Badge History.
Do not switch between floor tracking and no floor tracking in the same elevator record. If you want to
change an existing record, delete that record and create a new one with the desired floor tracking
method.
Interface
Select one of two options:
• Trigger All DOs prior to floor selection: All the appropriate floor selection buttons activate.
The user can select one or more floors.
• Trigger One DO upon floor selection: All the appropriate floor selection buttons activate.
The user can select only one floor.
Event Schedule
Administration Menu
The Event Schedule option opens the Event Schedule Form that allows you to define the time and day
of the week on which a device state will change, such as resetting an anti-passback status for entering
and leaving a building.