Digital outputs, Digital output form – GE v6 User Manual
Page 46
Secure Perfect 6.1.1 User Manual
44
Description
When the records are created, the default description is in the format:
mmmm-b-pp
where
mmmm
represents the micro number to which this digital input is associated,
b
represents the board number, and
pp
represents the point or device number.
Example: 0001-1-01 DI
This digital input is on micro 1, board 1, point 1. To change or add to this description, enter text over the
existing text and save the record. It is recommended that you keep the
mmmm-b-pp
prefix in each digital
input displayed to aid in locating the alarm points on the physical hardware. This field accepts a
maximum of 64 characters.
Facility
A
can be assigned for the new Digital Input record from the Facility drop-down list.
The same facility is assigned for all devices associated with the micro when a micro is created.
Be very careful when assigning the facility of a DI to a different facility than the micro. You can
create an undesired result if you do not fully understand facility assignment.
Digital Outputs
Digital Output Form
Reference Topics:
Device Menu
A digital output represents an external device, such as lights, sirens and door strikes that may be
connected to the micro. Refer to your micro installation manual for information on how to connect a digital
output device to the micro. The digital outputs available depend on the micro setup and readers used.
Use the Digital Output Form to search and view or modify an existing digital output record.
For a shortcut menu to related forms, move the mouse pointer below any of the tabs and click the
right mouse button. If you are using this shortcut menu to get to the Schedules Form, all schedule
records will display.
Description
When the records are created, the default description is in the format:
mmmm-b-pp
where
mmmm
represents the micro number to which this digital output is associated,
b
represents the board number,
and
pp
represents the point or device number.
Example: 0001-1-01 DO
This digital output is on micro 1, board 1, point 1. To change this description, type over the existing text
and save the record. It is recommended that you keep the
mmm-b-pp
prefix in each digital output
description displayed to aid in locating the alarm points on the physical hardware. This field accepts a
maximum of 32 characters.
Facility
A
option can be assigned for your new Digital Output record from the Facility drop-down list.
Be very careful when assigning the facility of a digital output to a different facility than the micro.
You can create an undesired result if you do not fully understand facility assignment.