Keypad alarm shunting, Keypad only type reader – GE v6 User Manual
Page 193
Secure Perfect 6.1.1 User Manual
191
K
Keypad Alarm Shunting
Reference Topics:
The keypad alarm shunting feature allows you to turn the monitoring of a group of alarms off or on using
the keypad. This can also be accomplished by setting up a schedule for an alarm group using a time
schedule.
Only reader board door inputs and 20DI board input points can be shunted from a keypad.
•
To identify a reader board door input, look for a default description that follows this format:
0001-1-01
Reader
.
•
To identify a 20DI board input point, look for a default description that follows this format:
0001-1-01
DI
.
Keypad Only Type Reader
Only reader board door inputs and 20DI board input points can be shunted from a keypad. (To
identify a reader board door input, look for a default description that follows this format: 01-1-01 Reader.
To identify a 20DI board input point, look for a default description that follows this format: 01-1-01 DI.)
Follow the steps below to shunt alarm groups within a micro connected to a keypad reader.
1. Click the start key on the keypad. The start key is labeled with either an asterisk <*> or a plus <+>
depending on the reader model.
2. Type one of the following:
0 - to turn monitoring off
1 - to turn monitoring on
3. Type the alarm group number (00 to 15) you want shunted.
4. Click the end key that is labeled with either a pound sign (#) or an <x>.
5. Click the start key on the keypad again.
6. Type your badge number on the keypad.
7. Click the end key (<#> or <x>).