MITSUBISHI ELECTRIC Mitsubishi Programmable Logic Controller QD75D - Manual (Page 210)

5 - 122
MELSEC-Q
5 DATA USED FOR POSITIONING CONTROL
Setting item Setting details
Cd.19 OPR request flag OFF
request •
The sequence program can use this data item to forcibly turn the OPR request
flag from ON to OFF.
Cd.20 Manual pulse generator 1
pulse input magnification
•
This data item determines the factor by which the number of pulses from the
manual pulse generator is magnified.
•
Value "0" : read as "1".
•
Value "101" or less: read as "100".
Cd.21 Manual pulse generator
enable flag
•
This data item enables or disables operations using a manual pulse generator.
Cd.22 New torque value
•
When changing the " Md.35 Torque limit stored value", use this data item to
specify a new torque limit stored value.
•
Set a value within the allowable range of the " Pr.17 Torque limit setting value".