Ending a connection, Connecting directly to an e-mail server, Setting up an e-mail account – Intermec 700 User Manual

Page 140

Advertising
background image

Windows Mobile 2003

Chapter

2

116

700 Series Color Mobile Computer User’s Manual

Ending a Connection

To disconnect, do one of the following:

S When connected via modem or VPN, tap the Connectivity icon on the

navigation bar, and then tap Disconnect.

S When connected via cable or cradle, detach your device.
S When connected via Infrared, move the device away from the other

computer or device.

S When connected via a wireless network, switch off the connection.

Connecting Directly to an E-mail Server

You can set up a connection to an e-mail server so that you can send and
receive e-mail messages by using a modem or network connection and In-
box on your 700 Color Computer.

Note: The ISP or network must use a POP3 or IMAP4 e-mail server and
an SMTP gateway.

You can use multiple e-mail services to receive your messages. For each
e-mail service you intend to use, first set up and name the e-mail service. If
you use the same service to connect to different mailboxes, set up and
name each mailbox connection.

Setting Up an E-mail Account

Do the following to set up an e-mail service. Tap the question mark at the
top of the screen for more assistance.

1

On your 700 Color Computer, tap Start > Inbox to access the Inbox
application. Tap Accounts > New Account.

2

Enter an e-mail address, tap Next, Cancel, then Next after the status of
the automatic configuration is listed as “Completed.”

Advertising