Intermec 700 - Manual (Page 358)

Configurable Settings Appendix — A
334 700 Series Color Mobile Computer User’s Manual
Beeper Volume
Sets the volume for the good read beep. Note that this is not available when
you use an imager with your 700 Color Computer.
Action
Tap the Beeper volume parameter, then select an option to change this
parameter setting.
SNMP OID
1.3.6.1.4.1.1963.15.3.1.4.1.6.1
Options
0 Low
1 High (default)
2 Medium
3 Off
4 Vibrate
Disabling the Volume
To disable the beeper, tap Start > Settings > the Personal tab > Sounds &
Notifications > the Volume tab, drag the System volume slider bar to the
left “Silent” position, then tap ok to exit this applet. See Chapter 1,
“Introduction“ for more information.