Intermec 700 - Manual (Page 402)

Configurable Settings Appendix — A
378 700 Series Color Mobile Computer User’s Manual
PEAP (Protected EAP)
This protocol is suitable for performing secure authentication against Win-
dows domains and directory services. It is comparable to EAP-TTLS (see
page 385), both in its method of operation and its security, though not as
flexible. This does not support the range of inside-the-tunnel authentica-
tion methods supported by EAP-TTLS. Microsoft and Cisco both support
this protocol.
Use “PEAP” to configure the use of PEAP as an authentication protocol
and to select “Open,” “WPA,” or “Network EAP” as an association mode.
To Enable PEAP with an Open Association
1 Set 8021x Security as “PEAP.”
2 Set Association to “Open.”
3 Skip Encryption as it is automatically set to “WEP.” See page 372 for
information about WEP encryption.
4 Enter your unique user name and password to use this protocol. Select
Prompt for password to have the user enter this password each time to
access the protocol; or leave Use following password as selected to auto-
matically use the protocol without entering a password.
5 Tap Get Certificates to obtain or import server certificates. See page
388 for more information.
6 Tap Additional Settings to assign an inner PEAP authentication and set
options for server certificate validation and trust. See page 381 for more
information.