Intermec 700 - Manual (Page 183)

Network Support — Chapter 4
159 700 Series Color Mobile Computer User’s Manual
PhoneUtility (760 Computers with GSM/GPRS Radios)
Note: This application is for 760 Computers with GPRS radios, using
PSM builds older than 3.65 (Operating System version 4.41), due to E911
requirements issued by the FCC. In the United States, voice is not an op-
tion on 760 Computers with CDMA radios.
With the WAN radio module installed in your 760 Computer, you can
send and receive telephone calls. Use the speaker on the back of the com-
puter as your earpiece and use the connector on the bottom of the com-
puter for your mouthpiece.
Tap Start > PhoneUtility from the Today screen to access the application
which will process your phone calls. Tap Exit or ok to close this
application and return to the Today screen.
Audio Mode
Select either Handset or Speakerphone from the Audio Mode box, then
do the following to send or answer a phone call:
S Tap the numbers for a phone call, using Clear to erase each digit, then
tap Send to initiate the call.
S Tap Answer to receive an incoming call.
S Tap End to disconnect a transaction.
S Drag the Vol slider up or down to adjust the speaker volume.
S Drag the Mic slider up or down to adjust the microphone sensitivity.
Handset Audio Mode Speakerphone Audio Mode