Intermec 700 - Manual (Page 209)

Network Support — Chapter 4
185 700 Series Color Mobile Computer User’s Manual
Testing the AT Commands
These commands can be sent to either WAN radio by setting up a dial-up
networking connection to COM4. Do the following to initiate this con-
nection and test these commands to your radio:
1 From the 760 Computer, select Start > Settings > the Connections tab
> Connections. Under My ISP, tap Add a new modem connection.
2 Enter a name for the connection, select “WANA on COM4” from the
Select a modem drop-down list, then tap Next to continue.