Intermec 700 User Manual
Page 403
Configurable Settings
Appendix
—
A
379
700 Series Color Mobile Computer User’s Manual
To Enable PEAP with WPA Encryption
1
Set 8021x Security as “PEAP.”
2
Set Association to “WPA.” See page 372 for information about WPA
encryption.
3
Skip Encryption as it is automatically set to “TKIP.” See page 372 for
more information about TKIP.
4
Enter your unique user name and password to use this protocol. Select
Prompt for password to have the user enter this password each time to
access the protocol, or leave Use following password as selected to auto-
matically use the protocol without entering a password.
5
Tap Get Certificates to obtain or import server certificates. See page
388 for more information.
6
Tap Additional Settings to assign an inner PEAP authentication and set
options for server certificate validation and trust. See page 381 for more
information.