Intermec 700 - Manual (Page 356)

Configurable Settings Appendix — A
332 700 Series Color Mobile Computer User’s Manual
Beeper/LED
To access the settings from the 700 Color Computer, tap Start > Settings
> the System tab > the Data Collection icon to access its control panel
applet.
Use the right and left arrows to scroll to the Beeper/LED tab, then tap this
tab to access its parameters.
Most of these functions are not available when using an imager. The following
table shows which functions are supported either by an imager or by a
laser scanner.
Beeper Function Imager Laser Scanner
Beeper X
Beeper Volume X
Beeper Frequency X
Good Read Beeps X
Good Read Beep Duration X
The following are parameters for features on the 700 Color Computer.
Note that these are listed in the order of their appearance.