Intermec 700 - Manual (Page 404)

Configurable Settings Appendix — A
380 700 Series Color Mobile Computer User’s Manual
To Enable PEAP with Network EAP
1 Set 8021x Security as “PEAP.”
2 Set Association to “Network EAP.” See page 371 for information about
EAP.
3 Set Encryption to either “WEP” or “CKIP.” See page 371 for informa-
tion about CKIP and page 372 for information about WEP encryption.
4 Enter your unique user name and password to use this protocol. Select
Prompt for password to have the user enter this password each time to
access the protocol, or leave Use following password as selected to auto-
matically use the protocol without entering a password.
5 Tap Get Certificates to obtain or import server certificates. See page
388 for more information.
6 Tap Additional Settings to assign an inner PEAP authentication and set
options for server certificate validation and trust. See page 381 for more
information.