Intermec 700 - Manual (Page 326)

Configurable Settings Appendix — A
302 700 Series Color Mobile Computer User’s Manual
Data Collection Control Panel Applet
Note: This applet is not available in units with PSM Build 3.00 or newer.
To determine your PSM Build version, tap Start > Programs >
File Explorer > the PSMinfo text file.
If your unit has PSM Build 3.00 or newer, then you may have the Intermec
Settings control panel applet in place of the Data Collection applet.
Information about the settings you can configure with the Intermec
Settings applet is described in the Intermec Computer Command Reference
Manual. The online manual is available from the Intermec web site at
www.intermec.com.
See the Data Collection Resource Kit in the Intermec Developer Library
(IDL) for information about data collection functions. Contact your Inter-
mec representative for more information.
To access the settings from the 700 Color Computer, tap Start > Settings
> the System tab > Data Collection to access its control panel applet.
Use the left and right arrows to scroll through the tabs along the bottom of
the control panel applet, then tap a tab to access its menus. These tabs rep-
resent the following groups of settings or parameters:
S Symbologies (starting on page 303)
S Symbology Options (starting on page 324)
S Beeper/LED (starting on page 332)
S Imager (starting on page 338)
S Virtual Wedge (starting on page 343)