Intermec 700 - Manual (Page 233)

6 Scanner Support — Chapter
209 700 Series Color Mobile Computer User’s Manual
Data Collection Configuration
For Units with PSM Builds Older than 3.00
Scanner settings for the 700 Color Computer can be configured via the
Data Collection control panel applet. From the 700 Color Computer, tap
Start > Settings > the System tab > Data Collection. See Appendix A,
“Configurable Settings” for more information about the following parame-
ters. Note that these are in alphabetical order.
S Codabar (page 306)
S Code 11 (page 320)
S Code 128 (page 309)
S Code 128 Options (page 310)
S Code 128 FNC1 Character (page 311)
S Code 39 (page 304)
S Code 93 (page 308)
S Code 93 Length (page 308)
S Data Matrix (page 322)
S Interleaved 2 of 5 (page 317)
S Matrix 2 of 5 (page 318)
S MaxiCode (page 323)
S MSI (page 313)
S PDF417 (page 314)
S Macro PDF (page 314)
S Micro PDF417 (page 316)
S Plessey (page 312)
S QR Code (page 321)
S Standard 2 of 5 (page 305)
S Telepen (page 319)
S UPC/EAN (page 307)
For Units With PSM Build 3.00 or Newer
You can configure scanner settings for the 700 Color Computer via the
Intermec Settings control panel applet. From the 700 Color Computer,
tap Start > Settings > the System tab > the Intermec Settings icon. See the
Intermec Computer Command Reference Manual (P/N: 073529) for infor-
mation about the settings you can configure with this applet. This online
manual is available from the Intermec web site at www.intermec.com.