Intermec 700 - Manual (Page 414)

Configurable Settings Appendix — A
390 700 Series Color Mobile Computer User’s Manual
To Enable LEAP with WPA Encryption
1 Set 8021x Security as “LEAP.”
2 Set Association to “WPA.” See page 372 for information about WPA
encryption.
3 Skip Encryption as it is automatically set to “TKIP.” See page 372 for
more information about TKIP.
4 Enter your unique User Name to use this protocol.
5 Select Prompt for password to have the user enter this password each
time to access the protocol, or leave Use following password as selected
to automatically use the protocol without entering a password.