Ioctl_hal_get_boot_device, Usage, Syntax – Intermec 700 User Manual
Page 286: Parameters, Return values
Programming
Chapter
—
7
262
700 Series Color Mobile Computer User’s Manual
IOCTL_HAL_GET_BOOT_DEVICE
This IOCTL code allows software to check which device CE booted from.
Usage
#include “oemioctl.h”
Syntax
BOOL KernelIoControl( IOCTL_HAL_GET_BOOT_DEVICE,LPVOID
lpInBuf,DWORD nInBufSize,LPVOID lpOutBuf,DWORD
nOutBufSize,LPDWORD lpBytesReturned );
Parameters
lpInBuf
Should be set to NULL.
lpInBufSize
Should be set to zero.
lpOutBuf
Must point to a buffer large enough to hold a DWORD (4 bytes)
that contains the boot device. The following boot devices are sup-
ported:
#define HAL_BOOT_DEVICE_UNKNOWN
0
#define HAL_BOOT_DEVICE_ROM_XIP
1
#define HAL_BOOT_DEVICE_ROM
2
#define HAL_BOOT_DEVICE_PCMCIA_ATA
3
#define HAL_BOOT_DEVICE_PCMCIA_LINEAR 4
#define HAL_BOOT_DEVICE_IDE_ATA
5
#define HAL_BOOT_DEVICE_IDE_ATAPI
6
nOutBufSize
The size of lpOutBuf in bytes (4).
lpBytesReturned
The number of bytes returned by the function.
Return Values
Returns TRUE if function succeeds. Returns FALSE if the function fails.
GetLastError() may be used to get the extended error value.