Intermec 700 - Manual (Page 41)

Introduction — Chapter 1
17 700 Series Color Mobile Computer User’s Manual
LEDs
The battery status LED B and the scanning/keypad shift and notifica-
tion LED C turn red, green, or yellow.
Battery Status LED
LED Color and Action Description
Steady Green Battery is more than 95% charged and unit is on charger.
Blinking Red Battery is low. The speed of the blinking increases as the
battery’s power gets increasingly lower.
Red Main battery is low; or if charging, remains red until your
700 Color Computer reaches 95% charge status.
Yellow The 700 Color Computer is on a charging source and there
is no battery pack installed. The mobile computer may also
be out of the charging range of 32° to 122° F (0° to 50° C).
When back in range, charging resumes and the LED
changes to red or green.
Alternating Red/Yellow Replace the battery pack.
Scanning/Keypad Shift and Notification LED
LED Color and Action Description
Momentary Green Indicates a good scan.
Blinking Green Indicates the scanner is initializing.
Steady Red Indicates the keypad is shifted to the Alpha (Blue) plane and
the 700 Color Computer is turned on.
Blinking Red Indicates the WAN (GPRS or CDMA) radio is on when the
700 Color Computer is in suspend mode. Also indicates
when the WAN radio is initialized on 761 Computers.
Yellow When the keypad is in alpha mode, the LED temporarily
switches from red to yellow to indicate a good scan.
This also indicates a Calendar or Task activity occurred.
Modem Support
The 700 Color Computer has the following modem options:
S Modem dock that provides charging and includes a built-in modem and
a serial port between which an application can switch.
S Snap-on modem, a stand-alone product, that attaches to the bottom of
your 700 Color Computer. Note that you cannot place this modem in a
dock, printer, or other devices. Contact your Intermec representative for
more information.