Intermec 700 - Manual (Page 400)

Configurable Settings Appendix — A
376 700 Series Color Mobile Computer User’s Manual
To Enable WEP Encryption
1 Set 8021x Security as “None.”
2 Set Association to either “Open” if WEP keys are not required; or
“Shared” when WEP keys are required for association.
3 Set Encryption to “WEP.” See page 372 for information about WEP
encryption.
4 If you had set Association to “Shared,” then select a data transmission
key from the Data TX Key drop-down list near the bottom of this
screen, then enter the encryption key for that data transmission in the
appropriate Key # field.