Initio INI-9100UW - Manual (Page 10)

x
MS-DOS/Windows
For MS-DOS operation, the INI-9100U/9100UW has built-in driver
support for hard disk operation. If peripherals other than disks are
used, such as CD-ROM or tape drives, the Initio ASPI driver will need
to be installed. The driver may be found on the INITIO INI-
9100U/9100UW DRIVER DISK 1.
Microsoft Windows 95
Software drivers are included for the operation of Windows 95.
Installation of the Windows 95 driver is explained in this section. The
driver may be found on the INITIO INI-9100U/9100UW DRIVER
DISK 1.
Microsoft Windows-NT
Software drivers are included for the operation of Windows-NT.
Installation of the Windows-NT driver is explained in this section. The
driver may be found on the INITIO INI-9100U/9100UW DRIVER
DISK 1.
Novell NetWare
Directions for installing a software driver for the operation of Novell
NetWare are provided. The installation procedure is explained in
detail to simplify installation of a version 4.x system driver.
Installation of a version 3.1x system driver is similar. The driver may
be found on the INITIO INI-9100U/9100UW DRIVER DISK1.
IBM OS/2
A software driver is provided for operation with a OS/2 system.
Installation of the OS/2 driver is explained in this section. The driver
may be found on the INITIO INI-9100U/9100UW DRIVER DISK 1.
SCO UNIX
Software drivers are provided for the operation with SCO UNIX. The
drivers allow the Initio INI-9100U/9100UW bus master to function at
an optimum level of performance. The installation procedure is
explained in detail and examples of screen displays are provided to
simplify installation for the SCO UNIX driver. The driver may be
found on the INITIO INI-9100U/9100UW DRIVER DISK 2.