Initio INI-9100UW - Manual (Page 75)

8-5
figure 8-2 Specify Initio Driver Path
7. In the new window that is displayed enter the Initio Driver path name:
•
Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive
A:
•
Type: A:\netware\v4x Press <ENTER>
8. In the window “Select a New Disk Driver to Install:” a list of available
Initio drivers for NetWare and their version numbers will be displayed.
•
Select ini910U.DSK by using the UP or DOWN ARROW key to
move the highlight, press <ENTER>.
•
System will ask for confirmation to load new driver, press
<ENTER>
•
Press <ENTER> to continue