Initio INI-9100UW - Manual (Page 115)

13-5
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that of the receiver.
•
Consult the dealer or a experienced audio television technician.
Note: Connecting this device to peripheral devices that do not comply with CLASS B requirements or
using an unshielded peripheral data cable could also result in harmful interference to radio or television
reception.
The user is cautioned that any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
To ensure the use of this product does not contribute to interference, it is necessary to use shielded I/O
Cables.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Declaration of the Manufacturer/Importer
We hereby certify that the INI-9100UW and INI-9100U PCI-SCSI Bus Master Host Adapter, in
compliance with the requirements of BMPT Vfg 243/1991, is RFI suppressed. The normal operation of
some equipment (e.g., signal generators) may be subject to specific restrictions. Please observe the
notices in the user’s manual.
The marketing and sale of the equipment was reported to the Federal Office for Telecommunication
Permits (BZT). The right to retest this equipment to verify compliance with the regulation was given to
the ZZF.
EN 55 9100UW2 Declaration of Conformance
This is to certify that Initio INI-9100UW and INI-9100U PCI-SCSI Bus Master Host Adapter is
shielded against the generation of radio interference in accordance with the application of Council
Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 9100UW2:1987
Class B (CISPR 22:1985/BS 6527:1988).
EN50081-1 GENERIC EMISSIONS STANDARD
EN50082-1 GENERIC IMMUNITY STANDARD
1) IEC 801-2 :1984(1000-4-2:1995);
2) IEC 801-3 :1984(1000-4-3:1995);
3)
IEC 801-4 :1988(1000-4-4:1995).