Initio INI-9100UW - Manual (Page 58)

6-7
4. This completes loading the Host Adapter Driver, follow the on-screen
directions to complete the Windows 95 installation. Exit and reboot the
system to activate the device driver
5. It is highly recommended that you verify your Windows 95 device driver
has been properly installed by selecting MY COMPUTER from the
desktop. Then select CONTROL PANEL:
•
Select SYSTEM from within the CONTROL PANEL group,
•
Select DEVICE MANAGER from within the SYSTEM group,
•
Select SCSI CONTROLLER from within the DEVICE MANAGER
listing, and
•
Select INITIO INI-9100U/9100UW SCSI HOST ADAPTER from
within the SCSI CONTROLLER listing. If “This device is working
properly” is displayed on your screen, the driver has been correctly
installed.
Updating the Initio device driver
1. Once a Windows 95 session is established, use your installed mouse or the
appropriate key strokes to select MY COMPUTER from the Main
Desktop. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER group.
•
Select SYSTEM from within the CONTROL PANEL group.
2. Select the DEVICE MANAGER tab from within the SYSTEM group.
•
Select the SCSI CONTROLLERS category from within the DEVICE
MANAGER listing.
•
Select the INI-9100U/9100UW SCSI HOST ADAPTER sub-category
from within the SCSI CONTROLLERS listing