Initio INI-9100UW - Manual (Page 74)

8-4
figure 8-1 Novell 4.x Installation
4. Select Install new NetWare v4.x from the window by using the UP or
DOWN ARROW key to move the highlight to the option you want,
press <ENTER>.
5. Follow the instructions in the NetWare User’s Manual for partitioning
the hard drives and naming the system.
6. Follow the directions on screen until you come to a window titled:
Load Disk Driver.
•
Press the <Ins> key to insert a new device driver.
•
Press the <F3> key to specify a different source drive/directory
(figure 8-2).