Initio INI-9100UW - Manual (Page 44)

4-7
BIOS Setup
Enable Host Adapter BIOS. This option controls the host adapter
usage of SCSI disk I/O routines inside the INI-9100U/9100UW BIOS.
By disabling this option you will eliminate the host adapter’s ability to
utilize boot capabilities in the INI-9100U/9100UW. Setting this to
“no” will also disable all subsequent features displayed by this on-
screen panel. (yes)
BIOS Support For More Than 2 Drives. This option supports 2 or
more disk drives on the SCSI bus for MS-DOS 5.0 or later when
enabled. The optimum device identification (ID) for multiple drive
operation is device ID 0 for a system disk and device ID 1 for the
second drive. (yes)
BIOS Treat Removable Disks as Fixed Disk. This option is able to
treat removable disks as fixed disks. With this option selected you can
run removable disk media without additional software drivers. To have
the ability to interchange media during operation, additional third
party drivers will be needed for that peripheral device. (no)