Initio INI-9100UW - Manual (Page 85)

9-5
.
1. Once an OS/2 session is established, insert INITIO INI-
9100U/9100UW DRIVER DISK 1 into your floppy drive.
2. By using your installed mouse, or by using the appropriate key strokes,
select DEVICE DRIVER INSTALL from the SYSTEM SETUP
group.
figure 9-2 Add OS/2 Device Driver
3. Select CHANGE source directory to read as the root directory.
4. Select OS2 and select SET.
5. Select DESTINATION DIRECTORY.