Initio INI-9100UW - Manual (Page 9)

ix
Inside this manual
This manual explains how to install Initio INI-9100U/9100UW host adapter
hardware and software drivers in most popular computer systems. The drivers
are provided on diskette and support Novell NetWare V3.1x/V4.x, IBM OS/2,
MS-DOS, SCO UNIX, Microsoft Windows 95, and Microsoft Windows-NT.
Support for MS-DOS and Microsoft Windows 3.1x is on-board the BIOS. The
INI-9100U/9100UW should be physically installed in the host computer before
attempting to install the driver for your computing environment.
The following headings briefly describe each of the chapters in this manual.
Introduction
A description of the product features and the capabilities of the Initio
INI-9100U/9100UW.
Getting Started
Identification of what information and equipment is required to setup
a SCSI bus system.
Hardware Installation
A description of how to install and setup the Initio INI-
9100U/9100UW host adapter hardware.
Host Adapter Setup
Provides an explanation of Initio’s SCSI setup utilities, adding another
dimension to SCSI bus versatility. Provides an explanation of how to
customize the INI-9100U/9100UW host adapter for special system
requirements.