Initio INI-9100UW - Manual (Page 54)

6-3
New Windows 95 installation
These instructions will guide you through the installation of the Initio host
adapter driver while installing Windows 95. Windows 95 will be installed from
either a CD-ROM or floppy diskettes. It is important that the hardware and
DOS 4.01 or higher have been installed successfully before proceeding further.
If installing from a SCSI CD-ROM drive, it is important that the Initio ASPI
driver, and CD-ROM driver be installed before proceeding further.
1. Access the Windows 95 CD-ROM either from the DOS prompt or from
Microsoft Windows 3.x File Manager. Execute the SETUP.EXE program
and follow the instructions on your screen. If you are installing from
floppy diskette, insert the Windows 95 Setup Disk 1 in your floppy disk
drive and boot your system. Follow the instructions on your screen.
2. Once a Windows 95 session is established, use your installed mouse or the
appropriate key strokes to select MY COMPUTER from the MAIN
DESKTOP. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER group.