Initio INI-9100UW - Manual (Page 55)

6-4
3. Select SYSTEM from within the CONTROL PANEL group,
•
Select DEVICE MANAGER tab from within the SYSTEM group
•
Select the OTHER DEVICES category from within the DEVICE
MANAGER listing.
•
Select the PCI-SCSI Bus Controller sub-category from within the
OTHER DEVICES listing.
•
In the Initio PCI-SCSI Bus Controller Properties window, select the
DRIVER tab, then select “CHANGE DRIVER...”.
•
In the SELECT HARDWARE TYPE window, select SCSI
CONTROLLERS.
•
In the SELECT DEVICE window, select “HAVE DISK...”.