Initio INI-9100UW - Manual (Page 53)

6-2
Microsoft Windows 95 Driver Installation
Overview
The Initio INI-9100U/9100UW will support Microsoft Windows 95 with the
addition of a software driver. The installation procedure described here
requires some experience in Windows 95 system setup and administration. The
device driver is transferred from the INITIO INI-9100U/9100UW DRIVER
DISK 1 to the hard drive where it is automatically initialized during the system
boot routine.
The following files are used for installation and will be found on the Initio INI-
9100U/9100UW DRIVER DISK 1:
INI910U.MPD INI-9100U/9100UW SCSI Host Adapter Windows 95
miniport driver.
INI910U.INF Windows 95 installation information file.
Installation
The INI-9100U/9100UW driver developed for Windows 95 is loaded during the
system boot routine and will remain resident on the drive. This is accomplished
by following one of the three installation procedures listed:
•
New Windows 95 installation.
•
Adding the Initio Windows 95 device driver to an existing Windows 95
system.
•
Updating INI910U.MPD device driver
Reference Documentation:
•
Windows 95 installation and user’s guide
•
The systems setup and installation guide
•
The documentation for system peripherals
•
Initio documentation for the SCSI host adapter
The procedures described to make changes to the system have distinct
differences. It is strongly suggested that the selected procedure be read and
understood before proceeding with the system configuration changes. Please
read the instructions carefully.