Initio INI-9100UW - Manual (Page 68)

7-8
5. Select INITIO INI-9100U/9100UW Host Adapter, select “OK” to
install the INI910U.SYS driver onto your hard disk drive.
6. In the WINDOWS NT SETUP window that is displayed, enter the Initio
Driver path name to continue:
•
Type: A:\WINNT, select “CONTINUE”
7. This completes updating the Host Adapter Driver. Follow the on-screen
directions to restart you computer and activate the new driver.
8. It is highly recommended that you verify your Windows NT device driver
has been properly installed by selecting MY COMPUTER from the
desktop. Then select CONTROL PANEL:
•
Select SCSI ADAPTERS from within the CONTROL PANEL group,
•
Highlight INITIO INI-9100U/9100UW SCSI HOST ADAPTER
from within the SCSI ADAPTERS listing, and select PROPERTIES.
If “This device is working properly” is displayed in the Device Status
box, the driver has been correctly installed.