4 selecting the network connection mode – InFocus IN5122 User Manual

Page 12

Advertising

1.4 Selecting the network connection mode

• If you select the wireless LAN, the wireless LAN adapters in your computer

are shown in the list.

• If the wired LAN is selected, the wired LAN adapters in your computer are shown.

NOTE

After starting the “LiveViewer”, the “Select the

Network Connection” screen comes up.

Select the network connection that you would like

to use. There are 3 options in the menu.

• Wireless LAN

• Wired LAN

• My Connection

If you select either the wireless LAN or wired LAN, go to 1.4.1 Selecting either the
wireless LAN or wired LAN

. (&below)

If you select My Connection, jump to item 1.4.2 Selecting My Connection. (&12)

[Troubleshooting]

If you select either the wireless LAN or wired LAN,

a list of the network adapters in your computer is

shown.

Select what you like to use in the list, and click
[Next]

Then, go to 1.5 Selecting the network
connection method

. (&14)

1.4.1 Selecting either the wireless LAN or wired LAN

Are you sure that you want to turn on the network adapter?

This screen is displayed when the selected

network adapter is invalid.

• Click [Yes] to turn the adapter on, and then go

to 1.5. (&14)

• Click [No] if you do not want to turn on the

network adapter. The screen will revert back

to the previous one to select another network

adapter.

1. Connection to the network

• Select Wireless LAN only when you connect the computer and the access point via

wireless network and connect the access point and the projector via wired network,

since the projector doesn't have wireless LAN feature.

NOTE

Advertising