InFocus IN5122 - Manual (Page 86)

84
7.4 Command Control via the Network (Continued)
When the authentication setting is enabled, the following settings are required.
(&60)
7) Click [Security Settings] on the main menu.
8) Click [Network Control] and enter the desired authentication password.
* See NOTE.
9) Click [Apply] button to save the settings.
NOTE
7. Other Features
• The Authentication Password will be the same for Network Control
Port1 (Port: 23)
, Network Control Port2 (Port: 9715), PJLink™ Port (Port:
4352)
, My Image Port (Port: 9716) and Messenger Port (Port: 9719).
• The new configuration settings are activated after the network connection has
been restarted. When the configuration settings are changed, you must restart
the network connection. You can restart the network connection by clicking
[Network Restart]
on the Advanced Menu>Network submenu.
Command & Reply Formats
For Command and Reply Format information, see the RS232 Network Command
and Control Manual.