InFocus IN5122 - Manual (Page 31)

29
1.7 Configuring the network settings manually (continued)
1. Connection to the network
If the entered IP address and projector's IP
address are the same, a warning dialog shown
to the right will be displayed.
Click [OK], and then enter an IP address
which is different than the projector's IP into
Changing Network configuration dialog.
If a network connection cannot be made using
the current Network configuration, the warning
dialog shown to the right will be displayed.
Click [OK] to return to the Changing
Network Configuration dialog, and then enter
appropriate configuration.
• If a Network configuration has been added on the computer to
connect to the projector, the added Network configuration will be erased once
the application software is closed.
NOTE
The message appears when the wireless
adapter you selected is being used for
another network connection.
• Click [Yes] to connect. Go to 1.8
Confirming the connection to your
destination
. (&30)
• Click [No] if you do not want to connect
and then the “LiveViewer” main menu
will display even though network
communication has not been established.
Click on the main menu to go back to
1.5 Selecting the network connection
method
. (&14)
n Are you sure you want to connect to the selected projector?