InFocus IN5122 - Manual (Page 24)

22
Wired LAN
Subnet mask *1: 255.255.255.128
(example)
2) Click [Connect].
3) The network connection will be established.
Go to 1.8 Confirming the connection to
your destination
. (&30)
1) Enter the following information for the
projector.
*1
If you use a Subnet mask other than Class A, B or C, this screen appears.
• If you need to know the network settings information on the projector,
follow these steps:
1) Turn on the projector, and make sure that the projector image is displayed.
2) Press the MENU button on the remote control or the ▲/▼ buttons on the
projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Go to ADVANCED MENU..., and
use the ► cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select NETWORK, and use the ► cursor
button to enter the item.
5) Use the ▲/▼ cursor buttons to select INFORMATION, and push the ►
cursor button.
6) The settings will be displayed in the NETWORK_INFORMATION-box.
NOTE
1.5 Selecting the network connection method (continued)
1. Connection to the network