InFocus IN5122 - Manual (Page 20)

18
Windows prevented network configuration
changes.
You may log into Windows as a User.
Click [OK], and the “LiveViewer” main menu
will be displayed even though the network
connection has not been established.
Click on the main menu and go back to
1.5 Selecting the network connection
method
. (&14)
This dialog will be displayed when you need
to add Network configuration settings on
your computer to connect to the projector.
Confirm with your network administrator if
the Network configuration displayed on the
dialog is OK, and then click [Yes].
n A network connection could not be established.
n You need to add Network configuration settings on your computer to connect to
the projector.
Consult your network administrator. Log into Windows as an Administrator, and
go back to 1.3.2 Starting the “LiveViewer”. (&9)
Click [NO], and the “LiveViewer” main menu will be displayed even though the
network connection has not been established. Click on the main menu and
go back to 1.5 Selecting the network connection method. (&14)
1. Connection to the network
1.5 Selecting the network connection method (continued)