InFocus IN5122 - Manual (Page 35)

33
1.9 Profiles
The network settings to connect the projector and computer can be stored as
a Profile. Once the Profile is stored, all you need to do is to select the Profile to
connect to the network. This is recommended when you use the same network
connection often.
1.9.1 Outline of Profiles
Profiles are created in the Manual Configuration
screen. (&23)
Up to 10 Profiles can be stored for each
network adapter.
1) Select [ Profile] and click [New].
2) “Create new profile” will display.
If you have already created 10 Profiles, you
cannot create a new one unless you delete
an existing Profile.
Input all the information required for your
network connection.
If you want to clear the information you input,
click [Clear].
1.9.2 Creating Profiles
3) Click [OK] to save the Profile, or click [Cancel] to delete the profile information.
4) The new profile will display in the profile list, if you click [OK].
• When you make a new Profile, verify the new data works properly by
selecting the associated Profile at the Profile connection. (&23)
• If you change your computer's network adapter, you must create a new profile
for the adapter.
NOTE
1. Connection to the network