InFocus IN5122 User Manual
Page 53
51
Item
Description
SNMP Port
Configures the SNMP port.
Port open
Click [Enable] to use SNMP.
Trap address
Configures the destination of the SNMP Trap in IP format.
• The address allows both IP addresses and domain names,
if the valid DNS server is setup in the Network Settings.
The maximum length of the host or domain name is 255
alphanumeric characters..
Network Bridge Port
Configures the Bridge port number.
Port Number
Input the port number.
Any number between 1024 and 65535 (except for 9715,
9716, 9719, 9720, 5900, 5500, and 4352) can be set up as
the Network Bridge Port number. 9717 is the default.
Click [Apply] to save the settings.
3.4 Port Settings (Continued)
•
The new configuration settings are activated after the network connection has been
restarted. When configuration settings are changed, you must restart the network connection.
You can restart the network connection by clicking [Network Restart] on the Advanced
Menu>Network submenu. If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
3. Web Control