InFocus IN5122 - Manual (Page 38)

36
1.9 Profiles (continued)
• If there are already 10 Profiles, the checkbox cannot be checked.
Please erase one of the existing Profiles.
• The Profile name for the stored data is assigned by “LiveViewer” automatically.
The name will display at the right side of the checkbox.
NOTE
Also, you can register a Profile to My
Connection, when the network connection is
established. When the network connection
is established, the “Connection to Projector
successful” screen is displayed. (&30)
If you wish to use the current connection
setting for My Connection, check in the box for
[Register this setting to My Connection]
.
Afterwards click [OK], if the present Profile can
be overwritten for My Connection.
A new Profile will be created and registered as
the My Connection Profile.
1. Connection to the network