InFocus IN5122 - Manual (Page 19)

17
• When entering the Passcode, the passcode is not case sensitive.
• If you are using a Subnet mask other than Class A, B or C, you will have to
establish the connection manually.
If the manual setting screen is displayed, please go to 1.5.1 (3). (&21)
NOTE
If you select [Enter PassCode] at item 1.5,
the “Please enter the PassCode” screen is
displayed. Enter the Passcode divided by
4-digits each in 3 boxes (total 12-digit).
Example PASSCODE: 1234 - 5678 - 9ABC
(2) Entering the Passcode
After entering the Passcode, click [Connect] to connect to the projector.
Go to 1.8 Confirming the connection to your destination. (&30)
If you click [Back], the screen will go back to 1.5 Selecting the network
connection method
. (&14)
[Troubleshooting]
n Incorrect PassCode.
The incorrect Passcode was entered.
Click [Back] to return to the “Please enter
the PassCode” screen.
Check the PassCode on the projector
screen (&15) and enter the code again.
1. Connection to the network
1.5 Selecting the network connection method (continued)