InFocus IN5122 - Manual (Page 25)

23
1.6 Manual configuration
There are 3 options for manual configuration:
If you select Configure Network Settings
Manually, go to 1.7 Configuring the network
settings manually
. (&25)
• Profile (&below)
• History (&24)
• Configure Network Settings Manually (&25)
• To check the settings in the profile, follow the process below:
1) Choose the profile you want to check.
2) Move the mouse cursor to the profile, and right-click on the mouse to display
a pop-up menu.
3) Select “Properties” in the pop-up menu, and left-click the mouse.
4) The setting information of the selected profile will be displayed. If DHCP is
set "On" in the projector, the network connection between the projector and
computer may not be successful since the IP address may change. If you
like to use the Profile connection, set DHCP "Off" in the projector.
NOTE
Selecting profile to connect to the network
with the projector. Profile must be entered in
advance. (&33)
1) Select [Profile].
2) Choose the profile listed in the window.
3) Click [Connect].
4) The network connection will be established.
Go to 1.8 Confirming the connection to
your destination
. (&30)
1.6.1 Profile connection
1. Connection to the network