InFocus IN5122 - Manual (Page 48)

46
3. Web Control
3.1 Logon
To use the Web Control features, you need to logon with your user name and
password. (&47) Refer to the following for configuring and controlling the
projector via a web browser.
1) The logon window as shown on the right will be
displayed. There are two ways to display this
window.

Using the “LiveViewer”:
Connect your computer and the projector
via Network using “LiveViewer”. (&9)
Then click the Web Control button on
the “LiveViewer” main menu (&37) to
start the Web browser software.

Using Web browser software:
Verify your computer and projector are
connected via the network, and then start
Web browser.
Enter the projector's IP address into the URL input box of the Web browser
as per the example below, and then press the Enter key or button.
Example
: If the IP address of the projector is set to 192.168.1.10:
Enter “http://192.168.1.10/” into the address bar of the web
browser and press the Enter key or click button.
2) Enter your user name and password, and then click [OK].
Example
: If the projector IP address is set to 192.168.1.10:
• The OSD language is the same language used on the Web Control
screens. If you want to change the Web Control language, you need to change
the OSD language on the projector (&LANGUAGE menu in the User’s
Manual).
NOTE