InFocus IN5122 - Manual (Page 18)

16
1) Turn on the projector, and make sure the projector image is displayed.
2) Press the MENU button on the remote control or the ▲/▼ buttons on the
projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Go to ADVANCED MENU..., and
use the ► cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select NETWORK, and use the ► cursor
button to enter the item.
5) Use the ▲/▼ cursor buttons to select INFORMATION, and use the ► cursor
button to display INFORMATION.
6) The Passcode appears in INFORMATION window.
Method 2
• Use Method 2 when you project your computer image using
“LiveViewer”, or when the LAN port is not selected as the input source.
• If there is no communication between the projector and computer within 5
minutes, the Passcode will be changed.
NOTE
1. Connection to the network
1.5 Selecting the network connection method (continued)